Struct nix::mount::MsFlags

pub struct MsFlags { /* private fields */ }

Implementations

impl MsFlags

pub const MS_RDONLY: Self = _

Mount read-only

pub const MS_NOSUID: Self = _

Ignore suid and sgid bits

pub const MS_NODEV: Self = _

Disallow access to device special files

pub const MS_NOEXEC: Self = _

Disallow program execution

pub const MS_SYNCHRONOUS: Self = _

Writes are synced at once

pub const MS_REMOUNT: Self = _

Alter flags of a mounted FS

pub const MS_MANDLOCK: Self = _

Allow mandatory locks on a FS

pub const MS_DIRSYNC: Self = _

Directory modifications are synchronous

pub const MS_NOATIME: Self = _

Do not update access times

pub const MS_NODIRATIME: Self = _

Do not update directory access times

pub const MS_BIND: Self = _

Linux 2.4.0 - Bind directory at different place

pub const MS_MOVE: Self = _

pub const MS_REC: Self = _

pub const MS_SILENT: Self = _

pub const MS_POSIXACL: Self = _

pub const MS_UNBINDABLE: Self = _

pub const MS_PRIVATE: Self = _

pub const MS_SLAVE: Self = _

pub const MS_SHARED: Self = _

pub const MS_RELATIME: Self = _

pub const MS_KERNMOUNT: Self = _

pub const MS_I_VERSION: Self = _

pub const MS_STRICTATIME: Self = _

pub const MS_LAZYTIME: Self = _

pub const MS_ACTIVE: Self = _

pub const MS_NOUSER: Self = _

pub const MS_RMT_MASK: Self = _

pub const MS_MGC_VAL: Self = _

pub const MS_MGC_MSK: Self = _

pub const fn empty() -> Self

Returns an empty set of flags.

pub const fn all() -> Self

Returns the set containing all flags.

pub const fn bits(&self) -> c_ulong

Returns the raw value of the flags currently stored.

pub const fn from_bits(bits: c_ulong) -> Option<Self>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

pub const fn from_bits_truncate(bits: c_ulong) -> Self

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

pub const unsafe fn from_bits_unchecked(bits: c_ulong) -> Self

Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).

Safety

The caller of the bitflags! macro can chose to allow or disallow extra bits for their bitflags type.

The caller of from_bits_unchecked() has to ensure that all bits correspond to a defined flag or that extra bits are valid for this bitflags type.

pub const fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

pub const fn is_all(&self) -> bool

Returns true if all flags are currently set.

pub const fn intersects(&self, other: Self) -> bool

Returns true if there are flags common to both self and other.

pub const fn contains(&self, other: Self) -> bool

Returns true if all of the flags in other are contained within self.

pub fn insert(&mut self, other: Self)

Inserts the specified flags in-place.

pub fn remove(&mut self, other: Self)

Removes the specified flags in-place.

pub fn toggle(&mut self, other: Self)

Toggles the specified flags in-place.

pub fn set(&mut self, other: Self, value: bool)

Inserts or removes the specified flags depending on the passed value.

pub const fn intersection(self, other: Self) -> Self

Returns the intersection between the flags in self and other.

Specifically, the returned set contains only the flags which are present in both self and other.

This is equivalent to using the & operator (e.g. ops::BitAnd), as in flags & other.

pub const fn union(self, other: Self) -> Self

Returns the union of between the flags in self and other.

Specifically, the returned set contains all flags which are present in either self or other, including any which are present in both (see Self::symmetric_difference if that is undesirable).

This is equivalent to using the | operator (e.g. ops::BitOr), as in flags | other.

pub const fn difference(self, other: Self) -> Self

Returns the difference between the flags in self and other.

Specifically, the returned set contains all flags present in self, except for the ones present in other.

It is also conceptually equivalent to the “bit-clear” operation: flags & !other (and this syntax is also supported).

This is equivalent to using the - operator (e.g. ops::Sub), as in flags - other.

pub const fn symmetric_difference(self, other: Self) -> Self

Returns the symmetric difference between the flags in self and other.

Specifically, the returned set contains the flags present which are present in self or other, but that are not present in both. Equivalently, it contains the flags present in exactly one of the sets self and other.

This is equivalent to using the ^ operator (e.g. ops::BitXor), as in flags ^ other.

pub const fn complement(self) -> Self

Returns the complement of this set of flags.

Specifically, the returned set contains all the flags which are not set in self, but which are allowed for this type.

Alternatively, it can be thought of as the set difference between Self::all() and self (e.g. Self::all() - self)

This is equivalent to using the ! operator (e.g. ops::Not), as in !flags.

Trait Implementations

impl Binary for MsFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd<MsFlags> for MsFlags

fn bitand(self, other: Self) -> Self

Returns the intersection between the two sets of flags.

type Output = MsFlags

The resulting type after applying the & operator.

impl BitAndAssign<MsFlags> for MsFlags

fn bitand_assign(&mut self, other: Self)

Disables all flags disabled in the set.

impl BitOr<MsFlags> for MsFlags

fn bitor(self, other: MsFlags) -> Self

Returns the union of the two sets of flags.

type Output = MsFlags

The resulting type after applying the | operator.

impl BitOrAssign<MsFlags> for MsFlags

fn bitor_assign(&mut self, other: Self)

Adds the set of flags.

impl BitXor<MsFlags> for MsFlags

fn bitxor(self, other: Self) -> Self

Returns the left flags, but with all the right flags toggled.

type Output = MsFlags

The resulting type after applying the ^ operator.

impl BitXorAssign<MsFlags> for MsFlags

fn bitxor_assign(&mut self, other: Self)

Toggles the set of flags.

impl Clone for MsFlags

fn clone(&self) -> MsFlags

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for MsFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Extend<MsFlags> for MsFlags

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

Extends a collection with the contents of an iterator.

fn extend_one(&mut self, item: A)

🔬 This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬 This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl FromIterator<MsFlags> for MsFlags

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

Creates a value from an iterator.

impl Hash for MsFlags

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given Hasher.

impl LowerHex for MsFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for MsFlags

fn not(self) -> Self

Returns the complement of this set of flags.

type Output = MsFlags

The resulting type after applying the ! operator.

impl Octal for MsFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Ord for MsFlags

fn cmp(&self, other: &MsFlags) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl PartialEq<MsFlags> for MsFlags

fn eq(&self, other: &MsFlags) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &MsFlags) -> bool

This method tests for !=.

impl PartialOrd<MsFlags> for MsFlags

fn partial_cmp(&self, other: &MsFlags) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Sub<MsFlags> for MsFlags

fn sub(self, other: Self) -> Self

Returns the set difference of the two sets of flags.

type Output = MsFlags

The resulting type after applying the - operator.

impl SubAssign<MsFlags> for MsFlags

fn sub_assign(&mut self, other: Self)

Disables all flags enabled in the set.

impl UpperHex for MsFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Copy for MsFlags

impl Eq for MsFlags

impl StructuralEq for MsFlags

impl StructuralPartialEq for MsFlags